Applying DS1620 Using Fan control with external latch
Progetto di riferimento usando la parte DS1620 di Analog Devices
Immagine
1 / 1
Per prodotti finali
- Heater
- Industrial
Per contattare il Servizio Clienti.
- TCOM output is provided on the DS1620 to allow a fan to be directly controlled from the DS1620, without the need for external latches. This allows the fan to turn on only when the temperature exceeds the TH trip point and will stay on until the temperature drops below the TL trip point. After that, the fan is turned off. This is ideal for systems where power is important, as the fan is used only when necessary and only for as long as needed
Parti in primo piano (6)
| Numero parte | Produttore | Tipo | Per contattare il Servizio Clienti. | |||
|---|---|---|---|---|---|---|
|
DS1620S+ | Analog Devices | Temperature and Humidity Sensors | Temperature Sensor Digital Serial (3-Wire) 8-Pin SOIC Tube | ACQUISTA | |
|
|
DS1620S+ | Analog Devices | Temperature and Humidity Sensors | Temperature Sensor Digital Serial (3-Wire) 8-Pin SOIC Tube | ACQUISTA | |
|
|
DS1620S+T&R | Analog Devices | Temperature and Humidity Sensors | Temp Sensor Digital Serial (3-Wire) 8-Pin SOIC T/R | ACQUISTA | |
|
DS1620+ | Analog Devices | Temperature and Humidity Sensors | Temp Sensor Digital Serial (3-Wire) 8-Pin PDIP N Tube | ACQUISTA | |
|
|
DS1620+ | Analog Devices | Temperature and Humidity Sensors | Temp Sensor Digital Serial (3-Wire) 8-Pin PDIP N Tube | ACQUISTA | |
|
|
DS1620S+T&R | Analog Devices | Temperature and Humidity Sensors | Temp Sensor Digital Serial (3-Wire) 8-Pin SOIC T/R | ACQUISTA | |