TIDM-FRAM-WATERMETER, Water Meter Implementation with FRAM Microcontroller Reference Design
使用 Texas Instruments 的 MSP430FR4133IPMR 的参考设计
Image
1 / 5
依据最终产品
- Gas and Water Meter
说明
- TIDM-FRAM-WATERMETER, Water Meter Implementation with FRAM Microcontroller Reference Design featuring the MSP430FR4133 FRAM-based MCU, is a fully-functional battery powered magnetic pulse water meter with wired and wireless automatic meter reading (AMR) function. The instantaneous and total flow is displayed on the LCD. This design works in low power mode and reduces CPU engagement, which helps to reduce overall power consumption
主要特色
-
Embedded System TypeMCU
-
Family NameMSP430
Featured Parts (6)
| 零件编号 | 供应商 | 类别 | 说明 | |||
|---|---|---|---|---|---|---|
|
|
TSS721ADR | Texas Instruments | Bus Transceivers | Single Chip Meter Bus Transceiver | 买入 | |
|
|
DRV8837DSGR | Texas Instruments | Motor Controller and Driver ICs | H-Bridge Motor Driver 8-Pin WSON EP T/R | 买入 | |
|
|
AB26TRQ-32.768KHZ-T | Abracon | Crystals | Crystal 0.032768MHz ±20ppm (Tol) 12.5pF FUND 65000Ohm 2-Pin Mini-SMD T/R | 买入 | |
|
|
SN65HVD11SHKJ | Texas Instruments | Bus Line Transceivers | Single Transmitter/Receiver RS-485 8-Pin CFPAK Tube | 买入 | |
|
|
TPS78233DDCR | Texas Instruments | Linear Regulators | LDO Regulator Pos 3.3V 0.15A 5-Pin TSOT-23 T/R | 买入 | |
|
|
MSP430FR4133IPMR | Texas Instruments | Microcontrollers - MCUs | MCU 16-bit MSP430 RISC 15.5KB Flash 2.5V/3.3V 64-Pin LQFP T/R | 买入 | |