LM3409HV-REF, LM3409HV MR16 Buck-Boost Reference Design for Non-Dimming/Dimming LED Applications
Progetto di riferimento usando la parte LM3409HVMY di Texas Instruments
Immagine
1 / 1
Documenti associati
Per prodotti finali
- Automotive Lighting
- Illumination
- Industrial LED Lighting
Per contattare il Servizio Clienti.
- LM3409HV-REF, describes the design and shows practical test results of this LED-based MR16 designed to drive 3 LEDs in series from an AC input voltage of 11.5VAC rms generated by 50Hz magnetic transformers or Electronic transformers. Halogen MR16 bulbs do not flicker because the light emitted depends on the heat of the wire in the bulb. The heat changes more slowly compared with the change in current (50Hz) from the mains. The light emitted by LEDs changes instantly with the current. Therefore special measures need to be taken to avoid flickering. The solution is to create a system that has a power factor close to 1 to get the same behavior as the halogen bulb
Funzioni principali
-
Input Voltage11.5 (AC) V
-
Output Current0.35 A
-
Output Power4.87 W
-
Number of Derived Elements3
Parti in primo piano (4)
| Numero parte | Produttore | Tipo | Per contattare il Servizio Clienti. | |||
|---|---|---|---|---|---|---|
|
LM3409HVMY/NOPB | Texas Instruments | LED Drivers | LED Driver 2000uA Supply Current 10-Pin HVSSOP EP T/R | ACQUISTA | |
|
|
LM3409HVMY/NOPB | Texas Instruments | LED Drivers | LED Driver 2000uA Supply Current 10-Pin HVSSOP EP T/R | ACQUISTA | |
|
|
LM3409HVMYX/NOPB | Texas Instruments | LED Drivers | LED Driver 2000uA Supply Current 10-Pin HVSSOP EP T/R | ACQUISTA | |
|
|
LM3409HVMYX/NOPB | Texas Instruments | LED Drivers | LED Driver 2000uA Supply Current 10-Pin HVSSOP EP T/R | ACQUISTA | |