Design Example of Non Isolated Synchronous Buck Converter based on Mixed Signal MCU MD6602
Using Part
Vignette
1 / 2
Pour les produits finaux
- Compact SMPS
- Power Supplies
Description
- ANE0002, Reference Design describes the design example of non-isolated buck converter of full digital control using the MD6602 evaluation board (Tile). In this document, full digital control means that all processing control by digital from feed back detection of output voltage to PWM signal output for power transistor driving. The control method of power supply is voltage mode which is basic method of constant voltage output control. The phase compensation of controller calculates by DSP and consists of 2Pole-2Zero phase compensation of type II digital filter
Caractéristiques principales
-
Conversion TypeDC to DC
-
Input Voltage12 V
-
Output Voltage1.8 V
-
Output Current4 A
-
TopologyBuck
Pièces en vedette (4)
| Pièce numéro | Fabricant | Type | Description | |||
|---|---|---|---|---|---|---|
|
MCP14700T-E/SN | Microchip Technology | Gate and Power Drivers | Driver 3.5A 2-OUT High Side/Low Side Non-Inv 8-Pin SOIC N T/R | Ajouter au panier | |
|
|
MCP14700-E/SN | Microchip Technology | Gate and Power Drivers | Driver 3.5A 2-OUT High Side/Low Side Non-Inv 8-Pin SOIC N Tube | Ajouter au panier | |
|
MCP14700-E/MF | Microchip Technology | Gate and Power Drivers | Driver 3.5A 2-OUT High Side/Low Side Non-Inv 8-Pin DFN EP Tube | Ajouter au panier | |
|
|
MCP14700T-E/MF | Microchip Technology | Gate and Power Drivers | Driver 3.5A 2-OUT High Side/Low Side Non-Inv 8-Pin DFN EP T/R | Ajouter au panier | |