Allegro MicroSystemsACS712ELCTR-20A-TSensori di corrente

The Allegro MicroSystems current sensor easily measure the flow of current in an electric circuit. The ACS712 is provided in a small, surface mount SOIC8 package. The leadframe is plated with 100% matte tin, which is compatible with standard lead (Pb) free printed circuit board assembly processes. This device has a minimum operating supply voltage of 4.5 V and a maximum of 5.5 V. It has an operating frequency of 80 kHz. This part has a minimum operating temperature of -40 °C and a maximum of 85 °C. This device comes in tape and reel packaging during shipment.

Features and Benefits:
• Low-noise analog signal path
• Device bandwidth is set via the new FILTER pin
• 5 µs output rise time in response to step input current
• 80 kHz bandwidth
• Total output error 1.5% at TA= 25°C
• Small footprint, low-profile SOIC8 package
• 1.2 mohm internal conductor resistance
• 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
• 5.0 V, single supply operation
• 66 to 185 mV/A output sensitivity
• Output voltage proportional to AC or DC currents
• Factory-trimmed for accuracy
• Extremely stable output offset voltage
• Nearly zero magnetic hysteresis
• Ratiometric output from supply voltage

Application:
• motor control
• load detection and management
• Switch mode power supplies
• overcurrent fault protection

Easily measure the flow of current in an electric circuit with this ACS712ELCTR-20A-T current sensor from Allegro MicroSystems. It has an operating frequency of 80 kHz. This device has a minimum operating supply voltage of 4.5 V and a maximum of 5.5 V. This part has a minimum operating temperature of -40 °C and a maximum of 85 °C. This product will be shipped in tape and reel packaging to allow for quick mounting and safe delivery.