LM99-1EVAL/NOPB, Evaluation Board Using LM99-1 High Temperature, Remote Diode Temperature Sensor
Using Part
Vignette
1 / 2
Pour les produits finaux
- Office Equipments
- Processor Power Management
- Test Equipment
Description
- LM99-1EVAL/NOPB, Evaluation Board for the LM99-1 High Temperature, Remote Diode Temperature Sensor. The Evaluation kit includes the SensorEval software to communicate with the LM99-1 Evaluation Board by way of the USB cable from the controlling computer. The SensorEval software is used to control the writing and reading of the digital registers in the LM99-1 for doing the initial register setup, reading the local and remote temperatures, establishing certain temperature limit set points
Pièces en vedette (4)
| Pièce numéro | Fabricant | Type | Description | |||
|---|---|---|---|---|---|---|
|
LP2950CDT-3.3/NOPB | Texas Instruments | Linear Regulators | LDO Regulator Pos 3.3V 0.1A 3-Pin(2+Tab) TO-252 Tube | Ajouter au panier | |
|
|
LP2950CDT-3.3/NOPB | Texas Instruments | Linear Regulators | LDO Regulator Pos 3.3V 0.1A 3-Pin(2+Tab) TO-252 Tube | Ajouter au panier | |
|
LM99-1CIMM/NOPB | Texas Instruments | Temperature and Humidity Sensors | Temperature Sensor Digital Serial (2-Wire, SMbus) 8-Pin VSSOP T/R | Ajouter au panier | |
|
|
LM99-1CIMM/NOPB | Texas Instruments | Temperature and Humidity Sensors | Temperature Sensor Digital Serial (2-Wire, SMbus) 8-Pin VSSOP T/R | Ajouter au panier | |