Hall Effect Sensors
TLI493DW2BWA2XTSA1
XENSIV(TM) - TLI493D-W2BW A1 architecture consists of three main functional units: power mode control, sensor unit and I2C interface
Infineon Technologies AGThe Infineon XENSIV™ TLI493D-W2BW uses the latest 3D Hall generation from Infineon and is housed in an extremely small wafer-level package. With an 87 percent smaller footprint and 46 percent less height than previous comparable products, the sensor opens up completely new design options.
TLI493D-W2BW is available in 4 different variants ending with A0, A1, A2 or A3. The underlying feature is the so called Bus mode configuration of this device. It’s possible to connect up to 4 sensors to one I²C bus. The specific addressing is then done via 4 different variants.
Summary of Features
- • 3D (X, Y, Z) magnetic flux density sensing of ±160 mT
- • Programmable flux resolution down to typ. 65 µT
- • Extremely small form factor: typ. 1.13 mm * 0.93 mm * 0.59 mm
- • X-Y angular measurement mode
- • Power down mode with 7 nA (typ.) power consumption
- • 12-bit data resolution for each measurement direction plus 10-bit temperature sensor
- • Variable update frequencies and power modes (configurable during operation)
- • Temperature range Tj = -40°C…125°C, supply voltage range = 2.8 V…3.5 V
- • Triggering by external microcontroller possible via I2 C protocol
- • Interrupt signal to indicate a valid measurement to the microcontroller
Benefits
- • Component reduction due to 3D magnetic measurement principle
- • Small sensor form factor allows for very compact system designs
- • Wide application range addressable due to high flexibility
- • Platform adaptability due to device configurability
- • Very low system power consumption due to Wake-Up mode
- • Disturbance of smaller stray fields are neglectable compared to the high magnetic flux measurement range
Potential Applications
- • Anti tempering protection in smart meters
- • Joysticks e.g. for medical equipment, cranes, CCTV-control, game consoles
- • Control elements e.g. white goods multifunction knobs
- • Industrial joysticks
- • Ergonomic push- and control buttons on domestic appliances and power tools
- • Position control in robotics
Related Reference Board: S2G0_3D_TLI493DW2BW-A0
Spécifications techniques du produit
RoHS (Union Européenne)
Compliant
ECCN (États-Unis)
EAR99
Statut de pièce
LTB
Code HTS
8542.39.00.90
Automotive
No
PPAP
No
Type magnétique
Differential
Classification de module/IC
IC
Temps de descente de sortie type (us)
0.25
Tension d'alimentation minimale en fonctionnement (V)
2.8
Tension d’alimentation type en fonctionnement (V)
3.3
Tension d'alimentation maximale en fonctionnement (V)
3.5
Courant d'alimentation maximal (uA)
5000
Température de fonctionnement minimale (°C)
-40
Température de fonctionnement maximale (°C)
125
Emballage
Tape and Reel
Installation
Surface Mount
Hauteur du paquet
0.4
Largeur du paquet
0.93
Longueur du paquet
1.13
Carte électronique changée
5
Conditionnement du fournisseur
WFWLB
Décompte de broches
5

