Microchip TechnologyPAC1944T-E/4MX | Quad DC Power Monitor, 16-bit, 2 Alerts, I2CMoniteurs et contrôleurs d’alimentation

The PAC1944 is a quad power monitor and energy monitor that reports on bus voltage and sense voltage 16-bits of resolution. Power is reported as a simultaneous product of two 16-bit independent bus and sense voltages. All registers are accessible through I2C / SMBus including an 8 sample average for reading stability. The device can detect over/undervoltage, over/undercurrent and overpower against user programmed limits for each channel and generate ALERT outputs.

Product Features

• High-Side Current Monitor with Four Channels
  • 100 mV Full-Scale Range (configurable to 50mV)
  • External Sense Resistor Sets the Full-Scale Current Range
• Voltage Monitor with Wide VBUS Range
  • 0V to 9V FSR (configurable to 4.5V)
  • 16-bit Resolution
• Real-Time Auto-Calibration of Offset Error for Voltage and Current
• 1% Power Measurement Accuracy over a Wide Dynamic Range
• On-Chip Accumulation of 30-bit Power Results for Energy Measurement
• User Programmable Sampling Rates of 8, 64, 256 and 1024 SPS
• 5120 SPS for a Single Channel in Burst Mode
• 2.7V to 5.5V Supply Operation
  • 1.62-5.5V Capable I2C/SMBus and Digital I/O
  • SMBus 3.1 and I2C Fast Mode Plus, 1 Mbps
  • High-Speed Mode (3.4 Mbps)
  • Two Independent ALERT/GPIO pins
• ALERT on Over/Undervoltage and Current or Overpower Conditions
  • Coulomb Counting: When Selected, the Accumulator Accumulates VSENSE Values