| Compliant | |
| EAR99 | |
| Obsolete | |
| COMPONENTS | |
| Automotive | No |
| PPAP | No |
| Low Offset Voltage Amplifier | |
| Low Offset Voltage Amplifier | |
| 1 | |
| 0.5@±15V | |
| 9 | |
| 36 | |
| ±4.5 | |
| ±15 | |
| ±18 | |
| 0.00001@±15V | |
| 0.00001@±15V | |
| 7.5@±15V | |
| 45@±15V | |
| Single|Dual | |
| 1000 | |
| 135@±15V | |
| 20@±15V | |
| 116 | |
| 0.0025@±15V | |
| 100 | |
| 100 | |
| 95 to 105 | |
| 80 | |
| 450 | |
| No | |
| -25 | |
| 85 | |
| Tube | |
| Installation | Through Hole |
| Hauteur du paquet | 5.08(Max) - 0.51(Min) |
| Largeur du paquet | 6.35 |
| Longueur du paquet | 9.59 |
| Carte électronique changée | 8 |
| Nom de lemballage standard | DIP |
| Conditionnement du fournisseur | PDIP |
| 8 | |
| Forme de sonde | Through Hole |
To increase the amount of gain in your circuit use a multiple number of this general purpose amplifier OPA637AP OP amp from Texas Instruments in a cascaded fashion. Its maximum power dissipation is 1000 mW. Its typical dual supply voltage is ±15 V, with a minimum of ±4.5 V and maximum of ±18 V. This op amp has a minimum operating temperature of -25 °C and a maximum of 85 °C. This device is made with bifet technology. It has a single channel per chip. This device uses one or two power supplies.
| EDA / CAD Models |
Des dispositifs médicaux alimentés par l'IA
Livre blanc Arrow : conseils et informations sur l'IA pour la conception de solutions de diagnostic & thérapie rapides et sûres.