STMicroelectronicsL79L08ACZ-APLinear Regulators
Standard Regulator Neg -8V 0.1A 3-Pin TO-92 Ammo
| Compliant | |
| EAR99 | |
| Active | |
| COMPONENTS | |
| Automotive | No |
| PPAP | No |
| Standard | |
| 1 | |
| Negative | |
| ±5 | |
| Fixed | |
| -8 | |
| 0.1 | |
| -30 | |
| 175mV | |
| 80mV | |
| 6 | |
| 200°C/W | |
| Current Limit|Short Circuit Protection|Thermal Shutdown Protection | |
| 0 | |
| 125 | |
| Ammo | |
| Installation | Through Hole |
| Hauteur du paquet | 4.95(Max) |
| Largeur du paquet | 3.94(Max) |
| Longueur du paquet | 4.95(Max) |
| Carte électronique changée | 3 |
| Nom de lemballage standard | TO |
| Conditionnement du fournisseur | TO-92 |
| 3 | |
| Forme de sonde | Formed |
If you need to maintain a steady voltage on your circuit, then this standard L79L08ACZ-AP linear regulator from STMicroelectronics is perfect for you! Its typical dropout voltage at current is 1.7@40mA V. It has an overall accuracy of ±5 %. This voltage regulation device's single output can produce a current up to 0.1 A. Use this part at voltages lower than -30 V. With a fixed output that has a voltage of -8 V, this is power management at its best. By operating at a load regulation of 80mV and line regulation of 175mV you can provide a constant voltage at your output. Its polarity is negative. This voltage regulation device has a minimum operating temperature of 0 °C and a maximum of 125 °C.
| EDA / CAD Models |
Des dispositifs médicaux alimentés par l'IA
Livre blanc Arrow : conseils et informations sur l'IA pour la conception de solutions de diagnostic & thérapie rapides et sûres.