AD8364-EVALZ, Evaluation Board based on AD8364 2.7-GHz TruPwr Detector
Reference Design using part AD8364ACPZ by Analog Devices
Image
1 / 2
Associated Documents
For End Products
- Base-Station Power-Amplifier Linearization
- Power Management System
- Transmitters
- Wireless Infrastructure
Description
- AD8364-EVALZ, Evaluation Board is a fully populated, 4-layer, FR4-based for the AD8364. For normal operation, it requires a 5 V/100 mA power supply. The 5V power supply should be connected to the clip leads labeled VPS and COMM1. The two RF input signals are applied to two edge-mounted SMA type RF connectors. The output signals are accessible via the OUTA, OUTB, OUTN, OUTP and TEMP clip leads. The circuit board can also accommodate 6-pin and 26-pin headers through which the power supply, ground, temperature adjust nodes and output signal pins are accessible (the circuit board ships with these headers not installed)
Featured Parts (3)
| Part Number | Manufacturer | Type | Description | |||
|---|---|---|---|---|---|---|
|
AD8364ACPZ-WP | Analog Devices | RF Detectors | RF Detector 2700MHz 0dBm 32-Pin LFCSP EP Tray | Buy | |
|
|
AD8364ACPZ-REEL7 | Analog Devices | RF Detectors | RF Detector 2700MHz 0dBm 32-Pin LFCSP EP T/R | Buy | |
|
|
AD8364ACPZ-R2 | Analog Devices | RF Detectors | RF Detector 2700MHz 0dBm 32-Pin LFCSP EP T/R | Buy | |