onsemiNCP606MNADJT2GLinear Regulators
LDO Regulator Pos 1.25V to 5V 0.5A 6-Pin DFN EP T/R
| Compliant | |
| EAR99 | |
| Active | |
| COMPONENTS | |
| Automotive | No |
| PPAP | No |
| LDO | |
| 1 | |
| Positive | |
| ±1.5 | |
| Adjustable | |
| 1.25 to 5 | |
| 0.5(Min) | |
| 1.5 | |
| 6 | |
| 0.47@500mA | |
| 4mV(Typ) | |
| 10mV(Typ) | |
| 0.145 | |
| 75°C/W | |
| 18°C/W | |
| Enable Control|ESD Protection|Short Circuit Protection|Thermal Protection | |
| -40 | |
| 125 | |
| Tape and Reel | |
| Mounting | Surface Mount |
| Package Height | 0.88 |
| Package Width | 3.3 |
| Package Length | 3 |
| PCB changed | 6 |
| Standard Package Name | DFN |
| Supplier Package | DFN EP |
| 6 | |
| Lead Shape | No Lead |
Use this LDO NCP606MNADJT2G linear regulator from ON Semiconductor to vary your voltage levels to your desired level. It has an overall accuracy of ±1.5 %. Its typical dropout voltage at current is 0.45@500mA V. This voltage regulation device's single output can produce a current up to 0.675 A. Supply your circuit with sufficient power by implementing this, which requires a minimum input voltage of 1.5 V that does not exceed 6 V. With an adjustable output that has a voltage of 1.25 to 5 V, this is power management at its best. At a load regulation of 10mV(Typ) and line regulation of 4mV(Typ) a constant current can be produced at the output of your circuit. This component will be shipped in tape and reel packaging to allow for effective mounting and safe delivery. The maximum dropout voltage is 0.47@500mA V. This voltage regulation device has a minimum operating temperature of -40 °C and a maximum of 125 °C. Its polarity is positive.
| EDA / CAD Models |
Progetta dispositivi medici guidati dall'IA
White paper: consigli su progettazione e componenti e approfondimenti IA per soluzioni diagnostiche e terapeutiche più veloci e sicure.