Arrow Electronic Components Online
TC78H670FTGEL|TOSHIBA|simage
TC78H670FTGEL|TOSHIBA|limage
Motor Controller and Driver ICs

TC78H670FTG,EL

Dual Half Bridge Motor Driver 16-Pin VQFN EP T/R

Toshiba
Fiches techniques 

The TC78H670FTG is a two-phase bipolar stepping motor driver using a PWM chopper which incorporate DMOS with low on-resistance in output transistors. The clock-in decoder is built in. TC78H670FTG is a compact, battery power operable, 128 step stepper motor driver.

Features

• Built-in Dual H Bridges, Capable of controlling 1 bipolar stepping motor
• PWM controlled constant-current drive
• Power supply operating voltage: 2.5 V to 16.0 V
• Output current ratings: 2.0 A (max)
• Low on-resistance (High + Low side = 0.48 Ω (typ.)) MOSFET output stage
• Allows full, half, quarter, 1/8, 1/16, 1/32, 1/64, 1/128 step operation
• Built-in Sense resistor less current control architecture (Advanced Current Detection System)
• Low Standby Current 1uA
• Multi error detect functions (Thermal shutdown (TSD), Over current (ISD), motor load open (OPD) and Under voltage lockout(UVLO)), Error detection (TSD/ISD/OPD) flag output function
• Built-in VCC regulator for internal circuit
• Chopping frequency of a motor can be adjusted by external resistor
• Small QFN16 3mmx3mm package with thermal pad

Spécifications techniques du produit
  • RoHS (Union Européenne)
    Compliant
  • ECCN (États-Unis)
    EAR99
  • Statut de pièce
    Active
  • Code HTS
    8542.39.00.90
  • Automotive
    No
  • PPAP
    No
  • Type
    Motor Driver
  • Type de moteur
    Stepper Motor
  • Modes pas
    1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128
  • Configuration de sortie
    Dual Half Bridge
  • Tension de sortie (V)
    18(Max)
  • Courant de sortie maximal (A)
    2
  • Tension d'alimentation minimale en fonctionnement (V)
    2.5
  • Tension d'alimentation en fonctionnement (V)
    2.5 to 16
  • Tension d'alimentation maximale en fonctionnement (V)
    16
  • Courant de fonctionnement maximal (mA)
    4.3
  • Dissipation de puissance maximale (mW)
    1790
  • Température de fonctionnement minimale (°C)
    -40
  • Température de fonctionnement maximale (°C)
    85
  • Emballage
    Tape and Reel
  • Installation
    Surface Mount
  • Hauteur du paquet
    0.85(Max) mm
  • Largeur du paquet
    3 mm
  • Longueur du paquet
    3 mm
  • Carte électronique changée
    16
  • Nom de lemballage standard
    QFN
  • Conditionnement du fournisseur
    VQFN EP
  • Décompte de broches
    16
  • Forme de sonde
    No Lead

Documentation et ressources

Fiches techniques
Ressources de conception