P0496

The DE10-Nano Development Kit presents a robust hardware design platform built around the Intel System-on-Chip (SoC) FPGA, which combines the latest dual-core Cortex-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility. Users can now leverage the power of tremendous re-configurability paired with a high-performance, low-power processor system. Altera’s SoC integrates an ARM-based hard processor system (HPS) consisting of processor, peripherals and memory interfaces tied seamlessly with the FPGA fabric using a high-bandwidth interconnect backbone. The DE10-Nano development board is equipped with high-speed DDR3 memory, analog to digital capabilities, Ethernet networking, and much more that promise many exciting applications.

The DE10-Nano Development Kit contains all the tools needed to use the board in conjunction with a computer that runs the Microsoft Windows XP or later.

Specifications:

FPGA Device

• Intel Cyclone® V SE 5CSEBA6U23I7 device (110K LEs)

• Serial configuration device  – EPCS64 (revision B2 or later)

• USB-Blaster II onboard for programming; JTAG Mode

• HDMI TX, compatible with DVI 1.0 and HDCP v1.4

• 2 push-buttons

• 4 slide switches

• 8 green user LEDs

• Three 50MHz clock sources from the clock generator

• Two 40-pin expansion headers

• One Arduino expansion header (Uno R3 compatibility), can be connected with Arduino shields

• One 10-pin Analog input expansion header (shared with Arduino Analog input)

• A/D converter, 4-pin SPI interface with FPGA

HPS (Hard Processor System)

• 800MHz Dual-core ARM Cortex-A9 processor

• 1GB DDR3 SDRAM (32-bit data bus)

• 1 Gigabit Ethernet PHY with RJ45 connector

• USB OTG Port, USB Micro-AB connector

• Micro SD card socket

• Accelerometer (I2C interface + interrupt)

• UART to USB, USB Mini-B connector

• Warm reset button and cold reset button

• One user button and one user LED

• LTC 2x7 expansion header

Block Diagram of the DE10-Nano Board

Documents

DE10-Nano Product Brief