Socket Strip
Type describes the type of the component.
Gender
SKT
Gender describes the connector kind (Plug, Receptacle, Male or Female).
Number of Contacts
12
Number of Contacts describes the number of circuits or positions in the connector. Alternative Terms, Positions, Pins, Leads, Poles, circuits.
Number of Rows
2
Number of Rows is number of contact or terminal rows.
Termination Method
Solder
Termination Method describes the shape of pins, leads, terminals or connectors to show the way of its termination to a wire or PCB.
Terminal Pitch (mm)
1.27
Terminal Pitch describes the distance between circuits (positions) measured from center-to-center of adjacent conductors in the same row and from board direction.
Body Orientation
Straight
Body Orientation describes the direction of terminal, connector or body towards board or cable else describes the body style.
Polarization Type
Center Key
Polarization Type describes the shape, size, or position of connector pins and socket holes to ensure that a connector fits only one way into a socket. Polarized pins in connector ensure proper connection, also designed to prevent mis-insertions and reduce insertion time
Row Spacing (mm)
1.27
Row Spacing describes the distance between the center of first pin in one side of terminals and the center of the same pin in the other side.
Maximum Current Rating (A)
1.4/Contact
Maximum Current Rating describes the maximum allowable continuous current that can be passed through a component or a conductor without causing degradation of performance.
Maximum Voltage Rating
125VAC
Maximum Voltage Rating describes the maximum value of D.C. voltage or A.C. voltage capable of being applied continuously to a resistor at the rated ambient temperature. Rated Voltage shall be calculated from the following formula. Rated Voltage(V) = {Rated Power(W) * Nominal Resistance()} When the nominal resistance value exceeds the critical resistance value, the rated voltage is limited to the maximum working voltage.
Insulation Resistance (MOhm)
1000
Insulation Resistance is a measured value of electrical resistance of the insulation of a product or device.
Maximum Contact Resistance (mOhm)
30
Maximum Contact Resistance describes the contribution to the total resistance of a material which comes from the electrical leads and connections as opposed to the intrinsic resistance, which is an inherent property, independent of the measurement method.
Minimum Operating Temperature (°C)
-55
Minimum Operating Temperature describes the minimum temperature that the device can function correctly while working.
Maximum Operating Temperature (°C)
105
Maximum Operating Temperature describes the maximum temperature that the device can function correctly while working.
Mating Cycle (Cycles)
500
Mating Cycle describes the number of insertion and withdrawal cycles that product must be capable of withstanding while remaining within the performance levels of the applicable specification.
Packaging
Tube
Packaging describes the method of containing/packaging a product for delivery or sales.
Product Weight (g)
0.171
Product Weight describes the mass or weight of the product.
Product Length (mm)
8.63
Product Length describes the overall length dimension in the length direction.
Product Depth (mm)
4.59
Product Depth describes the overall depth or width dimension in the depth direction.
Product Height (mm)
4.51
Product Height describes the overall product height in the height direction.
Mounting
Surface Mount
Mounting indicates the method of mounting the device.